New product

Anti-fouling paint for cellar walls 

More details

924,00 € tax incl.

36,96 € per Kg TTC

Anti-fouling paint reinforced with a non-stick agent (PTFE**).
Recommended for the treatment of poorly lit wet areas. Contributes to the control and prevention of sanitary disorders inherent to cellars: dirt, mould, fungi.
ECO GESTE  The anti-fouling effect contributes to the preservation of the environment through a reduction in water consumption, cleaning and disinfection products.


Is part of the HACCP* approach.
It is part of the "Guide to Good Hygiene Practices in the Wine Sector".
Wine cellars (cellar walls)
Fruit juice factories
Breweries - Cider factories
Vinegar factories
And in any other area where it is necessary to maintain an optimal health environment.


The presence of anti-adherent agents associated with alkyd urethane resins allows simple, effective and very fast cleaning and decontamination of protected substrates.
(1) The presence of a non-stick agent makes it easier to clean dirt, mildew and mildew.
Recommended for use in humid environments and outdoors.
Insensitive to dirt: organic stains, grease, fingerprints.
Anti adherent : Allows quick cleaning.
Fugitive odour.
UV stable, washable, washable, washable - Easy to clean.
Excellent wet abrasion resistance.
Economical due to its high efficiency and durability.
Fire resistance: M1 classification.


Preparation of the support:  the substrate must be clean, sound and dry, free of any non-adherent material that may affect the adhesion of the coating. The substrate and its preparation must comply with DTU 59.1.
Application: can be applied on most surfaces (cement, plaster, aerated concrete, wood, earthenware, PVC, metal), raw or already painted. Exterior interior, on walls, baseboards, doors, ceilings, facades.
Compatible with most existing coatings (consult us).
When applied in cellars, the wine containers must be hermetically sealed.
Resumption of oenological activities 6 days after application.
(*) HACCP: Control of critical points for their control.
(**) PTFE: poly Tetra Fluoro Ethylene
Cement and metal tanks Cellar walls

Single component and ready to use, use in 2 or 3 coats (shake before use):
With a brush or a lacquer roller: 1st coat (5% dilution). 2nd and 3rd pure layers.
Spray: dilution from 5 to 10% of  DILUANT SALISTOP VITI

Drying: dry to the touch 6 hours. Can be recoated 12 to 24 hours.
In the case of a previously painted substrate, a preliminary test is recommended.
Special case after preparation of the substrate:
On new cement or lime plaster, apply  DEPRO® AQUAFIX VITI .

On Metals, apply a suitable primer: DEPRO® AQUAPRIM VITI.
Easy maintenance: clean as soon as stains or other dirt appear.
Note: Immediately rinse the substrate with clean water after applying a solution based on peracetic acid, hydrogen peroxide or sodium hydroxide solution.
Colors Blanc
Aspect Satiné
Extrait Sec en Poids 61 %
Yield 8 à 10 m²/kg
Dilution Diluant Salistop
Density at 20 ° C 1,2
Packaging 5 et 25 kg
Preservation 12 months in unopened original packaging, free from frost and heat
Recouvrable 12 à 24 h
Sec 6 h


11 other products in the same category