INERT & ODOUR-FREE PAINT

DEPRO MATEX VITI

New product

  • Plasticized mat finish makes it easy to clean away dirt and grime commonly found in cellars.
  • This odour-free surface covering may be applied in highly sensitive areas in which harmful odours might interfere with a product's organoleptic properties.
  • Highly resistant to humid conditions easily cleaned.
  • Soft paint, easy to apply and quick-drying.

More details

239,70 € tax incl.

9,59 € per Kg TTC

PRODUCT DESCRIPTION
A paint composed using a chemically-inert acrylic binder, DEPRO®MATEX VITI can be used indoors or outdoors to seal and protect highly absorbent surfaces (such as aerated concrete). DEPRO®MATEX VITI can be applied without the need for a finishing layer. In compliance with the "Good Hygiene Practices for the Wine Industry" Guide. In compliance with practices outlined in EU Regulation n°852 of April 29th 2004 on the hygiene of foodstuffs.
Research and Development / Scientific InputVECT’OEUR Laboratory- Certificate of Analysis N°CA11040497/2Analysis of HALOANISOLES, HALOPHENOLS and ORGANOHALOGENIC active ingredients.

USES
Recommended for use in sensitive areas and all premises were hygiene is a priority: cellar walls, winemaking premises, barrel storehouses, wine ageing and bottling premises. Recommended for use in conforming to HACCP* practices.

ADVANTAGES
  • Plasticized mat finish makes it easy to clean away dirt and grime commonly found in cellars.
  • This odour-free surface covering may be applied in highly sensitive areas in which harmful odours might interfere with a product's organoleptic properties.
  • DEPRO®MATEX VITI is a microporous product allowing surfaces to maintain their transference properties.
  • Highly resistant to humid conditions easily cleaned.
  • Soft paint, easy to apply and quick-drying.
INSTRUCTIONS FOR USE
Indoor/Outdoor application on: cement, concrete, chipboard, plaster, wood, brick and old paint layers.
Work surface preparation: the surface should be clean, dry, in good condition and free from any substance that may prevent the product from adhering to it.  Surfaces and their preparation should conform to DTU regulation 59.1, standards NFP 7420 1 and 2
Application temperature : Min. surface temp. 7°C - Max surface temp. 30°C. Mono-component product, easily applied in 1 or 2 coats. 1st coat at 5% dilution.
Application tools: Brush, roller, airless or pneumatic paint gun Dilutant: water.
Drying at 20°C (and 65% RH): Dust-dry in 25mn. Touch dry in 1 hour. Ready for re-coating after 6 hours.
Aspect Mat
Yield 4 à 7 m²/kg
Dilution Eau
Density at 20 ° C 1,58
Packaging 5 et 25 kg
Preservation 12 mois en emballage d’origine non ouvert, à l’abri du gel et de la chaleur
Séchage 25 min
Recouvrable 6 h
Sec 1 h

10 other products in the same category